In modern automotive manufacturing and specialized AGRR glass replacement services, the windshield is a primary structural safety component... Main structural component It is in the vehicle body that up to 45% of the roof strength in a rollover provides the main support for the deployment of the front passenger airbag. For this reason, the selection of a standard and high-quality automotive glass polyurethane adhesive is directly linked to the preservation of the occupants' lives in accidents.
In this specialized guide from Estehkam Chemical Industries, we will examine the requirements of the international standard FMVSS 212, the concept of Safe Drive-Away Time, high modulus (HM) adhesives, and non-conductive (NC) adhesives specifically for vehicles equipped with intelligent ADAS systems, and compare leading brands such as Pilkington (Pilkington) and CarGlass. 1. What is automotive glass polyurethane adhesive and why is the use of silicone adhesive disastrous?
Automotive glass polyurethane adhesive (Auto Glass Polyurethane Sealant) is a single-component elastomer based on advanced polyurethane polymers that transforms into a solid, highly elastic rubber with very high shear strength under the influence of moisture in the air (Moisture Curing).
glue Glass polyurethane Auto Glass Polyurethane Sealant is a single-component elastomer based on advanced polyurethane polymers that transforms into a solid, highly elastic rubber with very high shear strength under the influence of moisture in the air (Moisture Curing).
a) Safe Drive-Away Time (SDAT)
One of the most important factors for glass replacement service centers is the duration after the adhesive application during which the vehicle can leave the workshop without compromising the adhesion of the glass in the event of a potential accident:
The U.S. crash test standard
- requires that the glass must remain fully bonded to the body at least 80% of its perimeter in a collision at a speed of 48 kilometers per hour with a rigid barrier. requires that the glass must remain fully bonded to the body at least 80% of its perimeter in a collision at a speed of 48 kilometers per hour with a rigid barrier. Estehkam's advanced adhesives, based on Iran's climatic conditions, are available in models with drive-away times of 2 to 4 hours (for vehicles with two intelligent airbags).
- The chassis of modern vehicles is moving towards lightweight designs, and the torsional stiffness of the cabin is largely based on the windshield design. High modulus (HM) adhesives prevent body deformation over bumps, twists, and unnecessary cracking of laminated glasses.
c) Non-Conductive (NC)
In modern vehicles equipped with Advanced Driver Assistance Systems (ADAS), integrated antennas on the glass, rain sensors, light sensors, and glass heaters, the use of non-conductive (NC) adhesive is essential to prevent any electromagnetic interference or galvanic corrosion in the aluminum body.
3. Introduction of Estehkam's top polyurethane adhesive products
1. Pilkington automotive glass adhesive (Pilkington Windshield PU)
Pilkington automotive polyurethane adhesive
1. Pilkington Windshield PU Adhesive
Pilkington automotive glass polyurethane adhesive is the flagship adhesive for glass in the Estehkam product portfolio. This product, with a proprietary formulation under strict OEM licensing and standards, offers unparalleled adhesion to various metal frames of vehicles and ceramic printed glass.
- Ideal viscosity without sagging (Thixotropic) even in warm summer temperatures
- Stable thermal resistance from minus 40 to plus 90 degrees Celsius
- Available in aluminum cartridges with moisture-proof sealed packaging
2. CarGlass Special PU Adhesive
CarGlass automotive glass polyurethane adhesive is a professional and economical choice for after-sales service and authorized glass replacement representatives across the country. Its fast skin formation speed and suitable working time make this adhesive the number one choice for experienced installers.
3. Fenzi Glass PU Adhesive
Fenzi car glass glue Formulated with European technology, it is specially produced for resistance against environmental aging, ultraviolet (UV) rays, and constant road vibrations.
4. Technical Data Sheet (TDS) for Automotive Glass Adhesives from Estehkam Industrial Group
| Technical Property | Pilkington (Pilkington HM/NC) | CarGlass (CarGlass Special) | Fenzi (Fenzi PU) |
|---|---|---|---|
| Chemical base. | Single-component moisture-curing polyurethane | Single-component moisture-curing polyurethane | Single-component moisture-curing polyurethane |
| Appearance Color | Deep glossy black | Uniform black | Matte black |
| Shore A Hardness | 60 ± 5 | 55 ± 5 | 58 ± 5 |
| Tack-Free Time | 15 to 25 minutes | 20 to 30 minutes | 25 to 35 minutes |
| Cure Rate | 3.5 mm in 24 hours | 3.0 mm in 24 hours | 3.2 mm in 24 hours |
| Tensile Strength | ≥ 8.5 MPa | ≥ 7.0 MPa | ≥ 7.5 MPa |
| Standard Packaging | 310 ml cartridge / 600 ml sausage | 310 ml cartridge / 600 ml sausage | 310 ml cartridge |
5. Golden tips for proper application and prevention of water leakage and glass whistling
- Complete removal of the previous adhesive: Scrape the old adhesive with a special blade to a uniform thickness of 1 to 2 millimeters. Deep cuts down to bare metal must be covered with anti-corrosion primer.
- Use of cleaner and glass primer: The black ceramic area around the new glass must be cleaned with a lint-free cloth and a degreasing cleaner, and a uniform layer of primer should be applied to maximize resistance to ultraviolet rays.
- V-shaped nozzle cutting: The plastic nozzle should be cut in a triangular or V shape to inject the adhesive with a pyramidal or triangular cross-section. Injecting adhesive with a circular cross-section causes air bubbles to be trapped and rainwater leakage.
- Avoid fast driving before the SDAT deadline: The installation technician should inform the customer to keep the glass closed while securely shutting the doors and to avoid washing the vehicle with a pressure washer for 48 hours.
Frequently asked questions by buyers and installers of automotive glass adhesive (FAQ)
What is the difference between the packaging of the 310 ml cartridge and the 600 ml sausage?
The standard 310 ml aluminum cartridge is suitable for replacing a passenger car glass with simple manual or pneumatic guns. The 600 ml sausage packaging (Foil Pack Sausage) is more economical for production lines of buses, trucks, commercial vehicles, and high-volume workshops, reducing metal packaging waste by up to 90%.
Why is the expiration date and storage conditions of polyurethane adhesive critical?
Due to its high sensitivity to atmospheric moisture, polyurethane has a typical shelf life of 9 to 12 months when stored at temperatures between 10 to 25 degrees Celsius. Direct purchase from the factory ensures that the product is freshly produced and protected from improper storage at high temperatures.
Bulk purchase of automotive glass adhesive from the factory at competitive prices
Estehkam Chemical Industries Group, as the largest supplier of automotive and industrial adhesives, provides the possibility of direct shipment of various automotive glass adhesives from Pilkington, Carglass, Fenzi, and Sana Bond in cartons, pallets, and containers throughout Iran and export markets:
- 📞 Direct phone number for the automotive adhesives sales unit: 021-84329000
- 🏢 Head office and sales: Tehran, Shahid Motahari Street, Sana Building, Estehkam Chemical Industries
- 🏷️ Catalog and view all models: Price list and bulk purchase of automotive glass adhesive from the factory
Direct Factory Supply & Export Inquiries (Windshield Polyurethane Adhesive)
Estehkam Industrial Group manufactures and exports high-performance Pilkington & Feidar Windshield PU Adhesive under strict international quality standards. We supply master carton packaging and Full Container Loads (FCL) with competitive FOB and CIF terms.